Work-at-Height Rescue VR training for power & utilities in Ahmedabad.

DrillXR Work-at-Height Rescue trains the response that fall-arrest equipment alone cannot provide: getting a suspended worker down quickly and safely before suspension trauma sets in. The simulation reproduces the hazards that turn a survived fall into a fatality: suspension trauma in a worker left hanging in their harness too long, a delayed or unplanned rescue where the team improvises while the clock runs, rescuer falls during a hurried recovery, and secondary casualties from an uncontrolled lower. Inside the headset the rescue team raises the alarm and confirms the rescue plan and equipment, assesses the casualty, the anchors and the access route, establishes a rescuer attachment and reaches the casualty, attaches and takes the load before releasing the casualty's system, and lowers or recovers under control before handing over for first aid. Because a fallen worker has minutes, not hours, the headset trains a planned, rehearsed rescue rather than the improvisation that costs lives.

A fall arrested by a harness is only half a survival; the rescue is the other half, and it is the part most teams have never practised. The Factories Act 1948 requires safe work at height and adequate emergency provision on factory premises, OISD guidelines shape height-rescue arrangements on petroleum installations, and a site rescue plan tied to the work-at-height permit defines who recovers a suspended worker and how. The deadly failure is the absence of a plan: a team that has equipped every worker for fall arrest but never rehearsed reaching and lowering a casualty will lose critical minutes deciding what to do. DrillXR lets a rescue team run the full recovery against the clock, repeatedly, so the plan is proven and the roles are reflexive before a real worker is left hanging.